See how easy it is to install the slats!
The simple installation of the slats makes bringing them inside a piece of cake. All you need is a good mounting glue (Mamut glue), a distance to measure the distance between the panels (use pre-cut pieces of lamellas), patience and precision. Remember that you will attach our vertical slats both to a painted wall and to a laminated board, so feel free to adjust the option to your needs.
Step-by-step installation process:
- Cut the slat on one side to the appropriate length using a handsaw (we also recommend using a miter box)
- Apply MAMUT mounting adhesive or TESA tape
- Glue the slat to the wall
- Using another slat, determine the distance between the next slat to be installed
- Continue the installation by repeating the above steps
![Sampler - set of samples - slats [30x60] Sampler - set of samples - slats [30x60]](https://lameo.pl/4278-large_default/sampler-set-of-samples-slats-30x60-.jpg)
![Sampler - set of samples - slats [30x60] Sampler - set of samples - slats [30x60]](https://lameo.pl/3985-large_default/sampler-set-of-samples-slats-30x60-.jpg)
![Sampler - set of samples - slats [30x60] Sampler - set of samples - slats [30x60]](https://lameo.pl/3986-large_default/sampler-set-of-samples-slats-30x60-.jpg)
![Sampler - set of samples - slats [30x60] Sampler - set of samples - slats [30x60]](https://lameo.pl/3987-large_default/sampler-set-of-samples-slats-30x60-.jpg)











![Wall laths - cashmere [30x60]](https://lameo.pl/3899-home_default/wall-laths-cashmere-30x60-.jpg)







![Wall laths - Black [30x60]](https://lameo.pl/3964-home_default/wall-laths-black-30x60-.jpg)

![Milled MDF panel VARIO [50x50]](https://lameo.pl/4447-home_default/milled-mdf-panel-vario-50x50-.jpg)


![Wall slats - Beige [30x60]](https://lameo.pl/4274-home_default/wall-slats-beige-30x60-.jpg)



